Checklist/Todo-List
Print Profile(1)
Bill of Materials
Description
Welcome to my designs,
Description
Having found no checklist that perfectly met my needs, I endeavored to design my own
After extensive test prints to ascertain optimal geometries and tolerances, I am now prepared to share it
Advantages of this checklist:
- Print in Place—The sliders are integrated directly into the main body during printing
- Sliders remain secure—They engage with a noticeable click and exhibit minimal play
- Versatile mounting options—The diverse backplates offer a choice of fastening methods: screws, nails, or magnets
- Individually interchangeable tasks and titles—The inserts are easily swapped and readily labeled within Bambu Slicer
- Multicolor printing possible even without AMS—While AMS printing is an option, the subtle raised areas allow for easy post-print coloration with a pen
Should you have suggestions or ideas, please feel free to leave a comment
Likewise, if you desire a different number of tasks and headings, I am happy to incorporate them incrementally as interest dictates
If you appreciate this model, please extend your support by providing a boost and a favorable rating to encourage my continued work :)
Additional checklists:
5-item list: Checkliste/Aufgabenliste von Coldfinger - MakerWorld
Weekly planner: Wochenplaner Checkliste mehrsprachig von Coldfinger - MakerWorld
As I couldn't find a checklist that met my requirements, I tried to create my own
After many test prints to find the optimal geometries and tolerances, I am now ready to share it
Advantages of this checklist:
- Print in Place - The sliders are printed directly in the main body
- Sliders don't slip - They engage noticeably and don't have too much play
- Different fastening options - The different backplates allow you to choose between different fastenings Screws, nails or magnets
- Individually exchangeable tasks and titles - The inlays can be exchanged individually and easily labeled in the Bambu Slicer
- Multicolor but also possible without AMS - You can print it with an AMS, but you also have the option of coloring it later with a pen due to the slight elevations
If you have any suggestions or ideas, please leave me a comment
Also if you would like a different number of tasks and headings I will be happy to add these gradually if you are interested
If you like the model, please give me a boost and a good rating to continue supporting my work :)
Other Checklists:
5 tasks: Checkliste/Aufgabenliste von Coldfinger - MakerWorld
weekly planer: Wochenplaner Checkliste mehrsprachig von Coldfinger - MakerWorld
Feel free to check out my other designs as well:
Candle Holders
Lamps
Figures, Busts & Decor
Cups and Goblets
Practical Prints
If you have any questions, suggestions, or ideas for changes, please leave me a comment.
I design in my private time and for my own enjoyment, and I appreciate any recognition even more.
I don't have a large community, so I would be happy if you leave me a like or follow me on Instagram.
I would also be very happy about a Boost:
Boost Me (for free)
This helps me cover the costs of experiments and filament and helps me continue to offer and design special designs and helpful print data. I would be very happy if you support my work. It costs you nothing, and it helps me a lot.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (46)