Search models, users, collections, and posts
Happy Groundhog Day Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
1.9 h
1 plate
Open in Bambu Studio
Boost
6
8
0
1
9
4
Released
Description
Happy Groundhog Day Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x135.94mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA Jayo Black Transmission Distance: 0.2
PLA Spectrum Chocolate Brown Transmission Distance: 0.1
PLA PolyLite White Transmission Distance: 5
PLA Jayo Red Transmission Distance: 5.9
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Chocolate Brown
At layer #10 (0.88mm) swap to White
At layer #26 (2.16mm) swap to Red for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)