Super Nintendo Cartridge Display V2
Print Profile(6)
Description
Super Nintendo Cartridge Display V2 is here with a 12% reduction in filament, and less than half the print time of the original!
I updated the slots with a 5° angle to help prevent any potential slippage, and redesigned the body so the top looks like a Gen1 Super Nintendo.
I also redesigned the SNES logo to print separately so you can get the full red, blue, green, and yellow with the emblem, as well as reduce filament waste between purges and the prime tower.
There are print profile options for those with, and without, an AMS.
The first two print profiles are for AMS usage.
The last two print profiles are for those without AMS.
There is a slight variation with the non-AMS version where the connector pieces are one solid color, so this might be slightly noticible behind the “Super Nintendo” logo. Otherwise, the logo variations are there for “print by object” versus printing each color on a single plate.
Neither version requires any glue or epoxy. Just pop the pieces in their respective slots and you're good to go!
Happy printing!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (92)