PC wall mount (88mm thickness) i.e Fujitsu Esprimo

I needed a wall mount for an old Fujitsu Esprimo C710 desktop PC.
This is based on my 1U switch mount but I cut off the vertical bottom corners and made the top mount fit the 88 mm thickness of the Esprimo.

This will work with any desktop PC or similarly sized hardware.
It has screw holes for standard M4 countersunk drywall screws.

A tip is to screw the screws all the way in and then some before actually putting it to the wall, to remove some of the self threading in the mount.

PRINT INSTRUCTION
* Print with brim, no support needed.
* Hold your PC to the wall and scribe with a pencil, so you can see where to put the brackets.
* Screw the lower brackets to the wall.
* Hold the PC to the mounted corner brackets.
* Add the top mount.

Let me know if anything can be improved.

If you print and use this, please post pictures and write a comment! :)