Sukhoi Su-57 Hueforge
Print Profile(1)
Description
!!!If you want to print this on a Bambu Lab A1 mini, reduce the scale of the print but remember to turn off uniform scaling as to not alter the Z height!!!
Print at 100% Rectilinear infill with a layer height of 0.12mm and a base layer height of 0.16mm.
Filaments used:
PLA PolyLite Charcoal Black TD: 0.3
PLA Bambu Lab Basic Silver TD: 0.5
PLA Bambu Lab Basic Jade White TD: 5.0
PLA Bambu Lab Basic Beige TD: 8.0
PLA JAYO Gray TD: 2.5
Swap Instructions:
Start with black
At layer #6 change to Gray
At layer #12 change to Beige
At layer #15 change to Silver
At layer #21 change to White for the rest.
It is highly recommended to print with with a 0.2mm nozzle for greater detail, I also recommend using a 5mm Brim with an Object Gap of 0.10mm to avoid the sides of the model lifting.
Happy Printing!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)