LongMarch9

cover

1730945632892.jpg

1730945632907.jpg

1730945632932.jpg

plate_1.png

2025-02-01_113000c99ca58.jpg

0.4mm nozzle with 0.2mm layer height works fine at 100%PETG recommendedpick your own colorsupport free, can add if you want to but not needed

0.2mm layer, 2 walls, 15% infill

zackza

photo_2025-05-02_19-08-24.jpg

First of all I had to cut off those top parts which ALWAYS snapped off, because you cant print like that, has to be horizontal for these dummy13 pegs! then &nbsp;OR MAYBE it could have a chance if it was also 8 walls 99% infill, but these are now so theyre ALSO that much stronger&nbsp;but yeah NOW it CANNOT snap off no matter HOW hard you try! Go ahead and try! maybe Ill boost you if you can even snap these off lol just kidding tos tos.  &nbsp;I just wanted to help make these work better, and i have some other back pieces on my profile that have even more ball joints but yeah i wanted to improve this more popular one! enjoy!

fixed snap off problem,0.16mm layer, 8 walls, 99% infill

https://www.printables.com/model/999987-dummy-13-accessories-starter-pack

2 extra arms at the same height and width as the original shoulders, used peg from starter pack as a base to work on.For those who like it this way.PETG recommended, support free, should scale alright but let me know if there&#39;s an issue.

Dummy 13 extra arms backpack

ASIA

Print Profile(2)

Description

Comment & Rating (251)

This remix is based on

License

Related Models