Airsoft G&G SSG-1 Tactical Sleeve

A drop in sleeve for your G&G SSG-1 that has MLOK slots.  Excited about your new SSG-1, did you get home and realize you have no place to attach a light, vertical grip, grenade launcher or whatever.  Well me too.   MLOK accessories can attach directly.  RIS/RAS accessories can attach by adding an MLOK RIS/RAS.  Pictures show as printed with MLOKs and then some images with RIS that I got from amazon.  There is a set of assembly instructions, it does require some good cleaning with a 90 degree pick and then a skillful insertion of an m3 nut.  The nuts fit tight so it won't come lose when you disassemble, it makes the install more difficult but a one time event.  In order to install it, you need to remove the muzzle break.

You will need in addition to the printed parts.

(2) M3x20 SHCS

(2) M3 nuts - standard thickness(not a locking one, not a thick one, you could use a thinner one, if the press fit install triggers you, there is just risk of it falling out every time you take it apart. 

The printed parts include a cap in many thicknesses, you only need one.  But you need the right one and you don't know what it is.  I made one of these for myself and then ended up making maybe, I don't know, ten more or so as people at the airsoft field saw them and wanted one too.  And I found that thickness for a good tight fit varied.  The #4 cap was the most commonly fitting size, but I have used #3 - #6.  So while preparing this to post up I just designed a few more to try cover a large range.  If you don't want the waste of printing the entire range, start with a #4 and print accordingly if that doesn't fit.  The assembly instructions have a little more detail.