"Indestructible" Run Cam 5 case

This is a “indestructible” Runcam 5 camera case. Works with both Runcam 5 orange and black.

(It is not actually indestructible)

Designed myself, but did take inspiration from a friend's model. Reinforced gopro like mount for less likely- ness of breakage in smaller points

NOTE: it is a tight fit in order to fit the camera in the case (meant to be strong), (Once inside the case it is a bit difficult to remove it.) you may need a small piece of paper (like me) in order to get a more snug fit in the case.

I have beat the crap out of this case and am very impressed in how well it has held up

(I recommend you print this in “super high quality” (0.12) and 100% infill for max strength)

I also would recommend you use PETG or PLA+/ strong. but any plastic is fine…

• You will need: 1x 10mm m3 screw (with a matching washer preferably, to prevent screw slipping over time)
• (might need) a small piece of paper, (like a sticky note)