8mm Capsule Capper
Print Profile(2)
Bill of Materials
Description
Hello everyone
My latest project is a capsule filler, quite similar to commercially available models. It's a useful tool for filling up to 64 capsules with powders.
I created this project for a friend, we tested it, and it works!
This is the product sold on the well-known e-commerce site that inspired me:
The project is rather demanding, requiring approximately 350 grams of filament and several hours, but it's ultimately cheaper to print…and far more rewarding! :-)
To build it, you will need 4 M3 screws with corresponding 30mm bolts and 4 springs, readily available at any DIY store.
The first step is to assemble the base until you achieve this result:
Subsequently, the capsules and the corresponding powder can be inserted.
The second step involves inserting the second capsule into the second support until you obtain this result:
Finally, you will need to superimpose the second piece onto the one where you loaded the powder and apply pressure:
And you're done!
I'm including this YouTube video demonstrating the use of a similar product: ALL-IN Capsule
NOTE: To complete the project, you must download and print both print profiles.
Ciao and happy printing!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)