Sketched heart earrings

Love is in the air! these earrings shaped like doodled hearts are a perfect way to say that.

Perfect for Valentine's day!

Edit 2024/02/11: We've added a smaller version of the earrings. They are not just scaled down, the wall thicknesses have been maintained as the larger version - 2 perimeters at 0.4 mm line width.

Looking for other earrings to 3D print?

Make sure you check our Jewelry collection to see other designs. We also have some earrings shaped as an Anatomical Human Heart.

Printing

This is a quick print and consumes very little material: each earring takes up only ~ 20 cm of filament!

If your printer is properly tuned, printing will be very easy. We used a 0.4 mm nozzle, with 0.42 line widths and 0.2 mm layer height.

Make sure your bed is leveled and set your Z offset right to ensure good bed adhesion. We also recommend lowering the print speed and increasing the flow factor just for the first layer.

Follow us on Instagram! 

If you really like what we are doing and want to support us, you could buy us a coffee or two! It helps us continue creating usable things for 3D printing.

Selling prints of our designs

Please be aware that our designs are available for free for non-commercial purposes only. 

If you would like to sell 3D prints of our designs in your store, you can join one of our KoFi membership tiers! 

If you have other ideas, we would be happy to hear from you! Please send us a message through Printables or Instagram.