Console Table
Print Profile(1)
Bill of Materials
Description
This is a fully 3D-printed console table. Featuring an elegant traditional design that is sturdy enough to withstand jumping cats and rambunctious grandchildren. Standing 30-3/4 inches (781mm) tall, it is suitable for use as an accent table, a small entrance way table, or as a light worktable.
The legs are assembled by screwing the pieces together.
The leg assemblies are connected to the side, front, and back panels using 3mm x 10mm self-tapping screws.
The tabletop pieces are connected to the center brace and then to the leg supports using 3mm x 10mm self-tapping screws.
The strength of the table is due to an internal structure in the legs. In the center of the legs is a 13mm hole that runs most of the length of the legs. Printed as is, the legs seem to be strong enough but if one desires an even stronger table, a 27-inch long ½ inch wooden dowel can be inserted into the hole in the center of the legs. It will be a tight fit but if more than light tapping is required, the dowel should be sanded down a bit.
Filaments
For the legs I used Bambu brown galaxy because it looks a bit like mahogany and the Bambu basic PLA basic gold for the top because it goes well with the brown galaxy.
48 3mm x 10mm self-tapping screws Bambu Lab part number BT3X10 - AA200
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)