Queen of Blades - Kerrigan -StarCraft-HF
Print Profile(1)
Description
Project: Queen of Blades - Kerrigan -SC-HF.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 180x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm
Filaments Used:
PLA eryone matt black Transmission Distance: 0.4
PLA Jayo Red Transmission Distance: 4.6
PLA Jayo light purple Transmission Distance: 4.8
PLA Elegoo Yellow Transmission Distance: 4.9
PLA Eryone Skin Transmission Distance: 4.6
This print uses 5 unique filaments
Swap Instructions:
Start with matt black
At layer #15 (0.72mm) swap to Red
At layer #25 (1.12mm) swap to light purple
At layer #28 (1.24mm) swap to Yellow
At layer #34 (1.48mm) swap to Skin for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)