Search models, users, collections, and posts
5.25" Optical Drive Enclosure
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
5.9 h
1 plate
Open in Bambu Studio
Boost
89
277
14
11
302
120
Released
Description
A simple enclosure to encase an internal 5.25" Optical Drive, to be used externally with an adapter. Specifically, this was for the Pioneer BDR-209DBK with this adapter https://www.amazon.co.uk/dp/B07JGT17B8 (which is a very simple powered SATA adapter).
The dimensions are paramterised in the .scad file, so if the drive you want to print this for is slightly different, you can enter those into there and get a perfect fit.
Once the 2 parts have been printed, use a bit of super glue to stick the back plate on and then use some M3 screws to fix the drive in place.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (14)