Bambu X2D X1C P1S P2S P1P Hanging Poop Chute V2
Print Profile(8)
Description
Important: For those of you new to Bambu Studio, please print the correct print profile. After clicking ‘Prepare to Print’, navigate down to the print profile that suits your specific printer model. P2S and X2D profiles are towards the bottom of the list.
Overview: A clean and tidy way to manage filament poops and a necessity for all P1S, P2S, X1C and P1P owners! I've designed this self hanging poop chute in contrast to my popular on-bench model here. This model has been designed with a balance of aesthetics, functionality, print time and filament in mind. Prints in 2-3 hours depending on profile and uses 80g of filament.
Installation: This model hangs off a clip included with each print plate thats installed using the hex screw found below the chute on all printers. The clip is only 0.4mm thick so the short factory screw works well. If you have a longer screw that came with the printer (one comes with the scraper), that will work even better. Remove the screw, slide the screw into the clip and attach both the clip and the screw back into the printer case! Note: The clip is very small and has an overhang so it might print messy but once installed it is perfect. See the gif below for reference.
January 2026 V2 Update: No more magnets! The updated clip design prints faster and function better. I've also added a number of print plates to suit various use cases such as P1S or X1C printers using the rear spool holder. I will continue to improve the models so If you have any suggestions of feedback, please let me know in the comments below!
P2S and X2D Compatibility: I've added new print plates to suit the X2D and P2S which have wider poop chutes. For X2D, please print the (External Exhaust Fan) plate. See the print plate list below.
Print Plates:
- P1S X1C P1P (Standard Model) - Fits printers using AMS
- P1S X1C P1P (No Perforations) - Faster print time. Fits printers using AMS
- P1S X1C P1P (Rear Spool Holder) - Fits printers using the external rear spool holder
- P2S (Standard Model) - Fits P2S printers using AMS or the external spool holder
- P2S (No Perforations) - Faster print time. Fits P2S printers using AMS or the external spool holder
- X2D and P2S (External Exhaust Fan) - Fits X2D and P2S printers using the External Exhaust Fan kit
Alternative Poop Chutes:
- A link to my On-Bench Poop Chute is here
- A link to my Poop Chute Slide Bin is here
If you like this print, please leave a comment or a boost!
Boost Me (for free)
A boost encourages me to keep designing!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (790)