aelunya

cover

20250124_080100.jpg

plate_1.png

2025-01-30_134dfe0416f07.jpg

AMS is not needed. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm If you resize the model do NOT scale the Z axis or the print colours will not be in the same position. Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to Dark GreyAt layer #14 (1.2mm) swap to Light GreyAt layer #22 (1.84mm) swap to White for the rest.

0.08mm layer, 2 walls, 100% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like my models, please consider donating a boost 🚀!</boostcontent></boostme>AMS is not needed. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm If you resize the model do NOT scale the Z axis or the print colours will not be in the same position. Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to Dark GreyAt layer #14 (1.2mm) swap to Light GreyAt layer #22 (1.84mm) swap to White for the rest.

Print Profile(1)

Bill of Materials

Description

Comment & Rating (2)

License