Pop Up Panda Heart - Free 3D Print Model

Search models, users, collections, and posts

Zavrell

Toys & Games>Characters

IP Report

GIF

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

2.8 h

3 plates

4.5(53)

P1S, 0.2mm layer, 2 walls, 15% infill, 1 build plate

2.2 h

1 plate

4.8(12)

Open in Bambu Studio

Boost

542

1472

1.1 k

698

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Rubber Bands

Description

Lift the panda out of the heart and watch his arms pop out!

Simply use a small elastic band to connect the arms together in the base plate and click the top half together.

Push the panda into the heart and share with your loved ones!

Comment & Rating (73)

@user_2292512339

Panda Lover Love this Panda 🩷

@user_3304671231

Print Profile

0.2mm layer, 2 walls, 15% infill

few little flaws in print but was only second print tried ever....love it

(Edited)

@myung

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

printed perfectly!

@user_4240556302

Print Profile

P1S, 0.2mm layer, 2 walls, 15% infill, 1 build plate

printed without problems. fun

@AaronLease

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed great and the kid loves it. The press fit pins are quite small. I assembled it the first time and the rubber band was not tight/strong enough, so I went to pry the faces back apart and it broke all the pins. Totally my fault. Advice: test the rubber band and arm motion BEFORE snapping the front face on.

(Edited)

Strength Issue:After printing the face and back pieces again, the pins broke again. There is plenty of room to make larger pins that would be more robust.

@pimpworms

Print Profile

0.2mm layer, 2 walls, 15% infill

cute print using P1S

@KikiLittlePanda

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Thank you for this model 🐼💙

Show original

@printalolab

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Waiting for the elastic band to arrive... perfect print, it's so lovely!

@user_3092111482

Boosted

Print Profile

P1S, 0.2mm layer, 2 walls, 15% infill, 1 build plate

Amazing!

@user_1173148158

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

Support Issue:I have printed the red heart base for the panda pop up twice and both time when to gets to the final 30-40 minutes of printing the print fails- with the nozzle head coming in contact with the print, and knocking the print down, in addition to the cover off the nozzle head. Also, some of the hearts have flaws that occurred early on in the print as shown in the second picture

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.