Search models, users, collections, and posts
4 Tier Spice Herb Jar Rack Holder
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
9.1 h
3 plates
Open in Bambu Studio
Boost
67
182
7
2
130
32
Released
Description
DIMENSIONS :
- jar slot - 48H x 48W x 102 depth (mm)
- overall height - 201.6 mm
- overall width - 54 mm
- overall depth - 219.8 mm
- Three separate parts, easy, no AMS, no waste, two color print.
- Adjust the speed according with your particular filament.
- The filament I used : eSUN ePLA Matte Deep Black & eSUN ePLA Matte Morandi Green
- Check before glueing if the main body fits into the side panels grooves. This is a tight fit design, do not skip this step. Some of you might have issues with the "elephant foot", therefore some very light sanding of the edges might be required.
- Do not apply glue on the main body.
Apply the glue into the grooves on the side panels, without using it in excess.
- Glue everything together, place a weight on top of it and let the glue to cure.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)