MotorCycle LED Lamp
Print Profile(1)
Description
Here you will find a beautiful Motorcycle lamp that you can easily print yourself.
Recommended Print Settings:
Main Body: For optimal detail, ideally print the main body with a layer height of 0.16 mm. To save time, you can increase this to a maximum of 0.2 mm
Back Plate: Optimally print at 0.20 mm. MAX 0.24!!
Diffuser: This version ensures a soft light distribution, creating a more atmospheric ambiance.
The back plate is not particularly snug as I firmly adhere it before sale. This simplifies the back plate assembly for me. You can increase the back plate size by 0.5% to see if it fits more tightly.
- You should affix the support for the LED strips with some plastic adhesive.
- Then insert the LED strips. Since most LED strips have an adhesive backing, I use the supports to prevent them from detaching due to the heat generated by the COB LED strip.
- The LED strip should be at least 74cm long
I wish you much joy with printing and crafting! If you have questions or want to share your result, I look forward to your feedback!
Happy Printing!
Membership
Information on commercial licensing on MakerWorld
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (45)