Sarcastic bird - Not responsible - Hueforge

Sarcastic funny humor hueforge print

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE THE Z HEIGHT

Filaments Used:
    PLA Kingroon Black Transmission Distance: 0.1
    PLA Kingroon white Transmission Distance: 5.4
    PLA kingroon yellow Transmission Distance: 5.8
    PLA Kingroon red Transmission Distance: 5.6
    PLA Bambu cyan Transmission Distance: 1.7
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to white
    At layer #14 (1.2mm) swap to yellow
    At layer #17 (1.44mm) swap to white
    At layer #19 (1.6mm) swap to red
    At layer #24 (2mm) swap to white
    At layer #28 (2.32mm) swap to cyan
    At layer #30 (2.48mm) swap to white for the rest.