Search models, users, collections, and posts
Safety Cat Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
3 h
1 plate
Open in Bambu Studio
Boost
6
7
1
0
6
2
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Jade White
At layer #18 (1.52mm) swap to Yellow for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (1)