Print Profile(1)
Bill of Materials
Description
Introduction
This is a simple lamp frame and shade housing the Bambu Lab LED-Lamp-Set 001 (Kit001).
It's printed without supports and assembled without tools.
The finished lamp can be set on every bottle with a neck diameter of max. 32mm.
Printing
The Lamp consists of 4 printed parts:
- Bottle_Lamp_Cap
- Bottle_Lamp_Shade
- Bottle_Lamp_Band
- Bottle_Lamp_Frame
The print is separated onto two print plates - each for one color.
All parts can be printed without supports.
All parameters are set in the print profile.
The seam is set to the back of the model.
Assembly
After printing all parts click in each other - no tools required.
- Clip the arms of the frame into the holes in the shade
- Slide the band carefully over the shade
- Put the LED lamp into the top part of the shade (cable first)
- Close the top part of the shade wit the cap
- Place the assembled lamp on your favorite bottle and let it shine
Have printing. Leave a like, comment if you have any issues and if you feel generous leave a boost.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (22)