brim and skirt remover
Print Profile(3)
Description
Tool to help remove brims and skirt leftovers from straight edges.
Where classic brim removers can leave a rough edge or eat into the material this tool gives you a cleaner smoother finish.
Make sure to degrease your bed very good as the adhesion surface is limited.
Version 4.0;
- geometry fix that can cause a missing layer.
- better orientation and support.
- cut-out that prevents clogging of brims.
- hole in the rear to push out old blades.
- some strength improvements.
to assemble it you need thee pieces of hardware that are easy to obtain.
- a piece of a snap-off blade (18mm blade)
- two small DIN 7981 wood screws (L = 9-10 mm long) d = 3.5
Also check out the support remover tool
https://makerworld.com/en/models/934236-support-remover#profileId-898763
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (362)