Don Pablete

user_3019243523

Fresh off the printer! The details on this model are insane!

user_3679361683

0.28mm layer, 2 walls, 10% infill

cover

photo_2025-01-29_14-54-18.jpg

photo_2025-01-29_14-54-11.jpg

photo_2025-01-29_14-54-21.jpg

plate_1.png

2025-01-29_5251cb83be02f.jpg

si se modifica el perfil de impresión, asegurate de añadir un relleno del 100 a la parte fina de la escuadra, de lo contrario se partirá.El relleno idoneo es de un 10%el soporte se hace con PLA hasta las dos ultimas capas de soporte que se hacen con PETG a 0 distancia, lo que deja un acabado liso y perfecto&nbsp;dejar enfriar en la placa para evitar warping, en caso de que se te tuerza la pieza, ponlo en la cama de la impresora a 60 grados, deja que se caliente y ponle un peso encima&nbsp;imprimir en placa lisa&nbsp;If you change the print profile, make sure to add 100% infill to the thin part of the bracket, otherwise it will break.The ideal infill is 10%The support is made with PLA up to the last two support layers which are made with PETG at 0 distance, which leaves a smooth and perfect finishLet it cool on the plate to avoid warping, in case the piece warps, put it on the printer bed at 60 degrees, let it heat up and put a weight on itPrint on a smooth plate

Should you modify the print profile, ensure you incorporate 100% infill into the slender section of the bracket; otherwise, fracture is likely.An optimal infill density is 10%.Employ PLA support material for all but the final two support layers, which should utilize PETG at a zero-distance setting, yielding a flawlessly smooth finish.Allow for cooling on the print bed to mitigate warping; should warping occur, reposition the component on the heated print bed at 60 degrees Celsius, permitting thermal expansion before applying weight.Utilize a smooth print surface.

Escuadra para la guillotina VEVOR. Esta guillotina viene con una escuadra movil que se mueve, no mantiene los 90º lo que la hace inutil. Con este accesorio podrás cortar comodamente, no se moverá el papel y tampoco se introducirá por debajo de la escuadra.&nbsp;el modelo en cuestion es este<a target="_blank" rel="noopener noreferrer ugc" href="https://es.aliexpress.com/item/1005003847329115.html">https://es.aliexpress.com/item/1005003847329115.html</a>&nbsp;&nbsp;Square for VEVOR guillotine. This guillotine comes with a mobile square that moves, it does not maintain the 90º which makes it useless. With this accessory you can cut comfortably, the paper will not move and it will not be introduced under the square.the model is this onehttps://es.aliexpress.com/item/1005003847329115.html

A precision square for the VEVOR guillotine. This guillotine includes a movable square that shifts, failing to maintain a 90° angle, rendering it ineffective. This accessory facilitates comfortable cutting, preventing paper slippage or intrusion beneath the square. The model in question is this one<a target="_blank" rel="noopener noreferrer ugc" href="https://es.aliexpress.com/item/1005003847329115.html">https://es.aliexpress.com/item/1005003847329115.html</a>

Print Profile(1)

Description

Comment & Rating (3)

License

Related Models

VEVOR Guillotine Square

Print Profile(1)

Description

Comment & Rating (3)

License

Related Models