Hardware-less/Snap-in M-lok Cable Managers - Free 3D Print Model

Search models, users, collections, and posts

WarrenFab

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 4 walls, 35% infill

Designer

16 min

1 plate

4.9(53)

Open in Bambu Studio

Boost

547

1764

1.2 k

755

Released

Description

I wanted to not have to worry about finding m-lok hardware for each and every one of these I needed, so this is a solution to that. As of right now, I can only get the horizontal ones to print correctly (without breaking the tabs, not staying in tight, etc), but I also have a vertical mounting model that I may upload at some point for you guys to test. I print them without a brim, but you may find that you need one. I know it sucks you can't print face side on bed plate, but that would severely hurt the strength of them. I can't pry them off by hand, but I can with a tool. Hopefully some of you find this useful!

Comment & Rating (77)

@jzeltman72

Boosted

Print Profile

0.16mm layer, 4 walls, 35% infill

Printed in pla+ and looks/fits great. Will most likely reprint in ASA or Pet-CF for some heat resistance

The profile uploader has replied

@WarrenFab

Looks great! Thanks for adding a picture!

@moaathe77

Boosted

Print Profile

0.16mm layer, 4 walls, 35% infill

Simple and effective

The profile uploader has replied

@WarrenFab

Awesome, thanks for uploading a photo as well!

@Bomb33

Print Profile

0.16mm layer, 4 walls, 35% infill

(Edited)

@ibelieveicanfly

Print Profile

0.16mm layer, 4 walls, 35% infill

The profile uploader has replied

@WarrenFab

awesome!

@Bayoublaster

What hand stop is in the picture? It looks nice.

The designer has replied

@WarrenFab

https://makerworld.com/en/models/638837-ar15-foregrip-9-m-lok#profileId-564478

@Bayoublaster

Replying to @WarrenFab :

Thanks! I'll have to try that one out.

@user_1952549295

to large for my M-LOK RAIL

The designer has replied

@WarrenFab

it should fit all, but it’s a very snug fit (on purpose)

@PS101

Boosted

Awesome TY!

The designer has replied

@WarrenFab

thank you!

@user_4085041805

Print Profile

0.16mm layer, 4 walls, 35% infill

comes in super handy. thanks

The profile uploader has replied

@WarrenFab

Glad to hear it!

@user_791404882

Print Profile

0.16mm layer, 4 walls, 35% infill

Fresh off the printer! The details on this model are insane!

The profile uploader has replied

@WarrenFab

thank you!

@4d2_

what holds the pressure pad

The designer has replied

@WarrenFab

it came with the Streamlight. it’s not a great mount, I helped it with a zip tie haha

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.