Lake Tahoe Magnet (8x3mm magnets)

Pictured Examples printed on a BambuLab X1C (Textured PEI)

Face-down Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s

Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). This model also has an edge object, and lettering outline. Have fun choosing whatever colors for the objects that you want.

8x3 Magnet recesses to allow gluing in the magnets easily (magnet strip can be used instead)

Hope you enjoy!