Indoor Sailplane
Print Profile(1)
Description
Hand Throw Glider for Indoor Fun
Awesome little glider and his big mama. Super quick print.
Also a practical tool to calibrate your first layer and test layer adhesion.
Boost Me (for free)
If you have fun with my models, please consider boosting me.
Preparations
Bend wings slightly upwards
Bend tail to a V shaped stabilizer
Bend tail slightly upwards directly behind the wings.
Launch
Grab directly behind the wings and throw gently. (See pictures)
3D printing settings
Layer height: 0.12mm works best. But 0.06mm - 0.24mm should be fine
Infill: 100%
Outer Lines:
Min 2 for small version
Min 3 for big version
Placement:
Glider is rotated 45° in z-axis so that the infill of the first layer goes along the wings. This gives some rigidity when bending the wings and stabilizers.
Works with PLA, PETG, ABS, ASA
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (80)