Parliament of Budapest
Print Profile(1)
Description
Photo taken from our trip to a spectacular setting, here is the Budapest Parliament seen at night from the boat.
Printing:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x104.01mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.5mm and the Actual Depth is 1.6mm
This print uses 4 unique filaments
Swap Instructions:
Start with eSun ePLA SS Black
At layer #8 (0.72mm) swap to Amazon Golden silk
At layer #12 (1.04mm) swap to BambuLab Lemon Yellow
At layer #17 (1.44mm) swap to BambuLab White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (19)