Print Profile(4)
Description
Wife approved: Custom designed Leaf Lamp with a cascade of elegant leaf-shaped layers arranged like an open pine cone pattern.
Fits a E14 light bulb base. Mounting hole is 1 CM. I recommend using LED or some other Energy Saving bulb.
When assembled, the full size is about 25 cm in height and 30 cm in width.
Assembly is straight forward.
- Top and Bottom circles are the same. Mount the E14 light bulb base to one of them - this is now the top circle.
- Push fit connect top and bottom circles with all sides, alternating between A,B,A,B,A,B sides. Make sure all the slits are facing downwards.
- Push fit each leaf, so that they are pointing downwards, start from bottom and do a complete circular layer before moving upwards. Depending on your printer, they might require some force to connect, so take your time and watch you fingers so they don't slip. If the angle is off, just disconnect by twisting back and forth and they'll be easier to assemble properly the second time.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (110)