Lamp Shade 8.0 - Spral vase
Print Profile(2)
Bill of Materials
Description
Lamp Shade 8.0
Minimal lamp shade with crystal pattern.
Print in spiral vase mode.
0,2 mm Layer height
0.6 mm Layer thickness
Time (PETG Translucent) ~ 4.5 hours (in standart size) (PLA is much faster)
For more stability print the second print profile. (NO vase mode)
The hole in the file is for a typical 40 mm threat (E27 light bulb). You can adjust the whole size to whatever size you need. Go under objects and scale the generic cylinder to whatever size you need. The lamp shade itself can be scaled aswell.
Please be careful when removing it from the print bed. The shade only has a whallthickness of 0,6 mm. Especially the first layer after the 7 bottom layers is fragile. I would recommend to go with a scraper under the bottom layer.
Enjoy!
By the way this filament was used. Bambu PETG Transluzent
https://eu.store.bambulab.com/de/collections/petg/products/petg-transluzent?variant=49074123145564
Membership
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (52)