Lego Brick Single-Row (Various Lengths)

Here you will find various single-row building blocks (Skinny Blocks) compatible with standard-sized plug-in systems. Due to various offsets in the CAD design, using the stored profile with my printer and Bambu Lab PLA+, I achieved very good clamping performance for my building blocks (both on the top side and on the bottom side) (a friend was able to replicate this with the same profile and PETG)

For other sizes, simply inquire, or create them yourself using my OnShape design (see below)

You can find more building blocks in my profile - more will also be added successively - if you need a specific block, just message me

However, the dimensions of the studs, bottom cylinders, and additional guiding structures on the inner wall can vary depending on the print profile, printer, and filament. For this reason, I have also created a test plate with different diameters, which you can print with your setup and easily determine the suitable diameter at least for the studs

With the value thus determined (or simply the measured differences in diameters related to your building blocks), you can create a copy of the CAD design in OnShape and easily specify the required diameter there. Besides the diameter for adjusting the clamping properties, the number of required rows/columns of the block can also be easily specified here, and the corresponding model will be automatically generated

The exact procedure for creating your own blocks using a configurable OnShape design (released for copying and adaptation) can be found in the attached documentation (pdf) in the project for the baseplates, outlined for a baseplate - however, the procedure for the blocks shown here is identical