ohio state jack sawyer scoop and score - Free 3D Print Model

Search models, users, collections, and posts

cjgeyer23

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

4.2 h

1 plate

5.0(4)

Open in Bambu Studio

Boost

Released

Description

Jack Sawyer scoop and score for the win! Sized to fit in a 5x7 frame. Make sure settings are as follows:

Project: jack sawyer strip sack hueforge.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 240.5x126.58mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA PolyLite Grey Transmission Distance: 1
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #13 (1.12mm) swap to Grey
    At layer #20 (1.68mm) swap to White for the rest.