Star Wars Armada - Rebel Transports

I changed the original Model by Armada_Legacy/Spacenavy90 (https://www.thingiverse.com/thing:6671437) to more accurately reflect the original Star Wars Armada Rebel Transports made by FFG. 
The changes are as follows:

• Added vertical lines on the upper hull and a crevice along the spine of the upper hull
• Added extra panels (thicker) and indents (thinner) on the upper hull
• Added indents on the lower hull and thickened parts of the lower armor for better printability.

For printing I strongly suggest printing in two parts and then glueing together.
Otherwise supports will cause scars. For maximum detail I would also suggest using a 0.2mm nozzle as a lot of details will be lost when using a 0.4mm nozzle.

Paint with tabletop paints at will, feel free to use my paint as inspiration:
Basecoat Seleton bone mixed with matte white, dark tone wash, drybrush matte white on the armored parts.
Cargo area is just ash grey with dark tone wash.