3D OBJ

cover

IMG_8823_04825bad-a535-4b56-b0bd-14d0d351b5bc.jpg

video_2023-12-22_14-27-57-2_d8bf2788-fa1e-4ec3-be6c-95a99134fee7.gif

IMG_9501_f8abe424-f250-48a5-b1c2-cd34963bb1c4.jpg

IMG_9502_c0b23f88-75c6-439b-bfa7-0f70eedfe9d9.jpg

plate_1.png

plate_2.png

video_2023-12-22_14-27-57-2_d8bf2788-fa1e-4ec3-be6c-95a99134fee7.webp

plate_1.webp

plate_2.webp

IMG_8823_c11b2da8-fc9a-4d00-aafb-f5fd9e7ff066.webp

It can be printed with minimum supports for the base.Play around with the threaded-plug to make it smooth in turning. you will need the tool to open it after closing it tightly by hand.&nbsp;UPDATE (1/10/2024)Now the slot for the coins has a little more space for bigger coins that weren't had take into consideration on the first version.&nbsp;&nbsp;

adaptive layer, 2 walls, 15% infill

IMG_0249.jpg

IMG_9501_9e2e2cfc-73e1-419c-97d4-4974c0e998f3.webp

IMG_9502_ab48aaaa-69d1-4cae-acb1-7a955ac6df6b.webp

Some people think that the original model is a little big for some printers, so... I decided to reduce it so that it fits almost any printer. No more tricks for the coin hole. 10cm total height.The screw is reduced on the slicer to 99% just to ensure a good fit.&nbsp;Have fun printing it!&nbsp;UPDATE (1/10/2024)Now the slot for the coins has a little more space for bigger coins that weren't had take into consideration on the first version.&nbsp;UPDATE (10/11/2024)Replaced print profile. As some users refers impossible to remove supports, &nbsp;i've been reviewing that. There were some parameters in the profile that, in some cases, made almost imposible to remove supports. Now would be easy to do that. I'll appreciate &nbsp;your feedback.&nbsp;Have nice prints! ;)

scaled down and improved supports (fits almost any printer)

BrushedAluminum

Screenshot 2024-11-09 at 2.02.13 PM.png

Fuzzy skin for piggy bank only (not the cap to ensure accurate fit). Eyes and nostrils colored in. Variable layer height for both objects to smooth out the large, rounded top surface of the bank.

Fuzzy skin, Colored eyes and nose, Variable layer height

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

A simple and functional piggy bank.As some people think it&#39;s too big for some printers. Added a print profile with the model scaled down. about 10cm of total height.&nbsp;I like to warn about profiles that some users scaled down without taking care about the slot for coins. If you want to make sure your coins can pass it, i recommend using the designer profiles.&nbsp;If you like it, you can <boostme><boosttitle>Boost Me</boosttitle></boostme>&nbsp;Have nice prints!

Piggy Bank

ASIA

Print Profile(3)

Description

Comment & Rating (276)

License

Related Models