Updated Silicone Tube Cap and 5 Nozzle Set - V5

This set includes two essential accessories for professionals and DIY enthusiasts working with silicone or acrylic tubes. Both models are designed to improve convenience and extend the usability of your materials.

15/04/2026 update v7:  Added new flat nozzle with V-notches - designed for applying silicone in two thin beads simultaneously. Flat tip approximately 10 mm wide. Available in 4 variants: 1 notch (one side), 2 notches (one side), 1 notch (both sides), 2 notches (both sides).  Thanks to @festayros for the request and feedback.

18/07/2025 update V6: Updated print profile has fixed the issue reported by @Brutalpule, where the 90-degree stronger nozzle couldn't be screwed in properly. Threads and clearance have been adjusted for a secure fit.

28/06/2025 update V5: I've uploaded an updated print profile for 90-degree nozzle (under the name 90 Degree Nozzle Stronger). Main print profile also was updated. This version features thicker walls to improve durability and better withstand pressure during use. Additionally, I adjusted the model's orientation on the build plate to ensure stronger layer bonding and minimize potential weak points. Thanks to user @Hakuna for reporting the issue with the original nozzle design.

28.05.2025 Update v4: added a new angled nozzle model - it's almost 45 degrees (more like 50°, but who's counting 😄). Perfect if you need a more diagonal application option!

14/05/2025 Update V3: added angled nozzle, updated description & photos, V1 & V2 profiles removed.

12/05/2025 Update V2: based on feedback from @Flame84 and @ME3DPrint

• Increased overall size of the cap and nozzle models by approximately 2% to reduce stress and prevent cracking during use.
• Improvements tested with Pattex, Soudal, and Mapei cartridges fand worked well.
• Added a new short nozzle model for users who prefer a more compact option.
• Improved models are available in the “Cap & Two Nozzles v2” profile.

Thanks for the valuable feedback—keep it coming!

1. Tube Cap:

• Prevents the contents of the tube from drying out after use.
• Features a secure, reusable design that fits most standard silicone or acrylic tubes.
• Simple and effective solution for preserving material quality.

2. Replacement Applicator:

• Perfectly replaces the original applicators that often dry out and become unusable.
• Durable and reusable, making it a sustainable alternative to disposable nozzles.
• Designed for precise application and ease of cleaning.

3. Short Nozzle – High Flow:

• Optimized for quick dispensing of material with minimal resistance.
• Ideal for tasks where precision is less important, but higher volume flow is needed.
• Shorter design reduces clogging and simplifies cleaning.

4. Angled Nozzle:

• Designed for accessing hard-to-reach spots or working in tight spaces.
• Provides better control when applying material at an angle.
• Maintains a snug fit and durable construction for repeated use.

Key Features:

• All models are easy to print and require no supports.
• Minimal filament usage for cost-effective printing.
• Compatible with most standard silicone and acrylic tubes.

Upgrade your workflow and keep your materials fresh with these practical 3D-printed solutions!

Let me know how it works for you. :)

Check out  my other models ;)