Creality Space Pi Plus Heat Deflector
Print Profile(4)
Description
Have seen a few other variants out there, but wanted something that was a little more minimalist as I have no need of silca bag storage since I use https://makerworld.com/en/models/627915#profileId-552556 with my Space Pi Plus. Modeled up the internals for this and a couple hours later this little guy popped out of the printer. Tested it up to 65C for a couple of hours with no vissible warpage. I do not recommend printing this with anything less an ABS for heat resistance since the temperature it gets exposed to is way higher then the set temp.
For reference here is bambu's table of material properties, https://bambulab.com/en-us/filament/guide , 5th row is heat resistance. PETG is almost 20C lower than ABS for Bambu's materials. This will very for other materials, but either way don't use PETG.
All my other drying accessories can be found here.
Shout out to https://makerworld.com/en/models/941146#profileId-907000 and https://makerworld.com/en/models/815728?designId=815728#profileId-757937 for the inspiration behind this.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (439)