1Kg to 3Kg Spool Holder /w Bearings
Print Profile(2)
Description
Boost Me (for free)
If you enjoy my model please don't forget to boost me, It's highly appreciated!
Simple Spool Holder/Roller that can support spools from 1-3KG or up to 120mm Wide (4-5/8'')
The Roller Bearings Gently Push Into The Base and Stay Retained, No More Rollers Falling off During Transportation!
Printable 8x150mm Rod included or you can purchase inexpensively from amazon (link below)
I have included an optional centering tool that can be used to center the Rollers on the Rods.
The rods are a tight fit into the rollers but should easily be pushed in by hand, a mallet can be used if you need assistance. The tight fit is to ensure the rods spin on the bearings instead of the rollers spinning on the rods.
I have also included an optional TPU profile for the rollers, this allows for a quieter operation while gripping the spool ever so slightly more.
Required Prints
- 1x - Base
- 2x - Rollers (PLA/PETG or use the optional TPU profile)
- 2x - 8 x 150mm rods or purchase SS linear rods (links below)
- 4x - Spacer Washers, while not required will help keep everything rolling quieter with less play
Required Purchase
- 4x - 608 Bearings
- Amazon - https://a.co/d/1n3Rhzu
Optional Prints
- 2x - TPU Rollers using separate profile (you do not need to print the PLA/PETG Rollers if you print the TPU Rollers)
- 1x - Centering tool which aids in getting the rods centered on the rollers
Optional Purchase
- 2x - 8 x 150mm Linear Rod
- Amazon - https://a.co/d/a0a18Y2
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (32)