Nothing so far. I’m not going for maximun cooling potential either. The fan is running on a stable low RPM to push the heated air out.

jordy

Any issues with cooling? Looks like the HDDs are pretty tight in there.

FlowRate1000

myrfie

0.2mm layer, 2 walls, 15% infill

cover

IMG_4650.jpg

IMG_4647.jpg

IMG_4648.jpg

IMG_4649.jpg

plate_1.png

2025-01-26_e973eeb1fc745.jpg

a 4 slot HDD bay that exists out of three 3D printed parts:<ul><li>2x drive sleds</li><li>1 drive cage with 4 holes for mounting a fan.</li></ul>Further for mounting you need:<ul><li>6 (or 4) Standard 6-32 UNC HDD screws</li><li>4 self-tapping fan screws</li></ul>The drives should then slide snugly into the drive cage.&nbsp;The case is designed around fitting 4 harddrives and a 120mm noctua fan. The

HDD Bay x4 with 120mm fan

ASIA

Print Profile(1)

Description

Comment & Rating (3)

License

Related Models