Viking Floki, Hueforge
Print Profile(1)
Description
Project: Floki the Shipbuilder Vikings.hfp
Print at 100% infill with a layer height of 0.08mm, utilizing a 0.16mm base layer
The model measures 128.46 x 178mm.
Higher layer heights are permissible, provided they remain below the minimum depth of 0.48mm.
The maximum depth is 2.2mm, with an actual depth of 1.9mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
PLA PolyLite White Transmission Distance: 5
This print employs four distinct filaments
Swap Instructions:
Commence with Black.
Transition to Blue Gray at layer #7 (0.64mm).
Transition to Beige at layer #8 (0.72mm).
Transition to White at layer #16 (1.36mm), continuing with White for the remainder.
Project: Floki the Shipbuilder Vikings.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 128.46x178mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue Gray
At layer #8 (0.72mm) swap to Beige
At layer #16 (1.36mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)