Search models, users, collections, and posts
Surf_And_Destroy(REAL _PHOTO_OF_) Hueforge
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
8.7 h
1 plate
Open in Bambu Studio
Boost
9
11
1
0
9
3
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 260x335.7mm in size
You may print at higher layer heights below the Min Depth of 0.88mm
The Max Depth is 2.5mm and the Actual Depth is 2.1mm
Filaments Used:
PLA Kexcelled Light Brown Transmission Distance: 3.5
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Yellow Transmission Distance: 6
PETG JAYO White Transmission Distance: 6
This print uses 4 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Light Brown
At layer #11 (0.96mm) swap to Black
At layer #14 (1.2mm) swap to Yellow
At layer #18 (1.52mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (1)