Sleek 100+ cards MtG Deck Box (no AMS needed)

Remember to read the model's license! The Standard Digital File file forbids SELLING, REMIXING and REDISTRIBUTING models!

Want to sell this model? The only legal and safe waya to obtain a commercial license are through my Patreon or via Makerworld Commercial License. Please join to know more. You can also support me, join our Patreon chat and learn more about what I am doing. With a Patreon membership, you'll also be able to participate in giveaways and send me private customisation requests!

🔍 Please read the model description fully before printing!

This simple deck box is a very sleek deck box that contains 100+ seleeved standard Magic the Gathering cards. I recommend printing it in Matte PLA for best looks, and in Silk PLA for the golden ribbon and emblem, though you can customize it as you prefer.

The assembly is very simple:

• The ribbon goes on the base.
• The emblem fits snugly in the hollow square in the ribbon.
• The lid fids in between the ribbon and the base.

Tolerances and clearances

• It is impossible to design for all filament types
• My models are designed and printed using Bambu Lab printers and Bambu Lab filaments
• If you use other filament types (different materials) or vendors (different brand), the result may differ. Before posting issues about tolerances / model tightness / loseness, please consider the filament you used for the print.
• Even with the same filament, results may vary (different settings, humidity, ventilation, etc…)

Common print troubleshooting

• Adhesion. Ensure you clean your print bed regularly with quality dish soap and water. Use of a releasing agent like Magigoo is advised. This advice is only applicable to PEI plates. Please consult your build plate manufacturer for detailed cleaning instructions! If you still have adhesion issues, try using a Super Tack or a BIQU cool plate; or add an extra brim to the model.
• Material. My prints are all PLA. Use other materials at your own risk. You will likely need to tune the printing profile.
• Temperature. Cold air and drafts can lower the quality of the print. Ensure your printer is located in an environment with stable temperature.
• Drying. Drying PLA is not a requirement, but be aware that over-drying can cause layer detachment.