Model rocket based on the V2 - Free 3D Print Model

Search models, users, collections, and posts

Eloy3D

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

A1 mini

P1S

H2D

X1 Carbon

X1E

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

All Bambu printers, 3 plates

Designer

8.8 h

3 plates

4.9(21)

Open in Bambu Studio

Boost

213

521

563

262

Released

Description

Model Rocket : V2 (check out my other rockets here)

Key Specifications:

Total Length: 442.93 mm
Loaded Weight (with parachute): 357 g
Body Diameter: 50 mm
Launch Lug Diameter: 4 mm
Max Motor Diameter: 24 mm
Max Motor Length: 93 mm
Recommended Motor Class: D or E class
Stability: 1.75 cal (must add 50 to 130g of weight to the nose cone)

Recovery System Details:

Max Parachute Length: 140 mm
Inside Diameter for Parachute Storage: 46 mm
Max Parachute Volume: 232.67 cm³

Performance:

Apogee: 165 m (using an E20-4 engine)

Assembly tips:

Use tape for a snug fit of the motor
Use an elastic material for the shock cord

Boost Me (for free)

Boosting this model would be much appreciated. Thank you in advance. :)

Printable on the A1 mini

Comment & Rating (35)

@user_1629233998

I launched this on a D12-5 with 50g of weight in the nose. Great flight. Only problem is the engine tube is a little tight. Had to coerce the motor in, and I broke the body trying to pull it out. Next time I would offset the inside 0.1-0.2mm and use tape to friction fit. Printed in Matte PLA. Spiderman pushed the launch button.

(Edited)

@STRFYTR

Did you get more than 1 launch out of it? PETG or ABS?

@ThorBooDanger

Print Profile

All Bambu printers, 3 plates

Looks not only great but also works really well. Attention! the required motor is only accessible to professionals in Germany. Or can be sourced from abroad. 😜

Show original

@Thedarcman

great print - my first rocket in pla aero - can’t wait to paint and launch. thanks!

@user_2778811219

Boosted

Print Profile

All Bambu printers, 3 plates

Nice V2... I might extend mine instead of adding weight. Changed color on top of Nose cone.

@Tabrezzioum

Print Profile

All Bambu printers, 3 plates

flawless

@CatDaddy71

Boosted

Print Profile

All Bambu printers, 3 plates

Good print once I got my adhesion issue worked out

@user_3615245201

HIDE, oh wait, you can't

@user_1881301486

Boosted

Print Profile

All Bambu printers, 3 plates

Nice print - I have not flight tested it yet. I modified the nose cone to the Project Bumper configuration. The launch lugs needed to be upsized, as did the hole for the engine.

(Edited)

The profile uploader has replied

@Eloy3D

Launch lugs are now 4mm and engine hole 0.2mm larger. Sorry for any inconvenience.

(Edited)

@ehansen2580

Print Profile

All Bambu printers, 3 plates

Printed well. I also scaled it up to a 29mm motor mounts and it flys well

@White_Shadow

What percent did you scale it to? :D

@ehansen2580

Replying to @White_Shadow :

x1.21 in all axis.

(Edited)

@LZW_175BlainPa

what is the inside diameter

The designer has replied

@Eloy3D

Hi, the inside diameter is 48mm.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.