Fog machine - nebulizer - moisturizer boat

This is finally not a boring humidifier / nebulizer

I have developed a beautifully presented moisturizer (nebulizer). The bowl not only contains a good water reservoir but also looks like a ship. A tower protrudes in the middle with holes on the sides for the mist to escape. The nebulizer is fixed inside. A cover ensures that the water remain concealed.

Humidifiers (nebulizers) are healthy. They not only improve the air quality but also provide a nice pleasant smell when adding essential oils or sauna infusions as desired. This model does not splash water thanks to its design. However, it is recommended to place the bowl on a suitable surface, as some mist is emitted all around.

The nebulizer is inexpensive and it is really fun to watch the nebulizer, which also illuminates the steam in different colors. This is anything but a boring humidifier.

Improvements (illustrations differ)!

The cover contains a hole for the cable because the hole in the shell has been moved upwards.

For safety reasons and because the supplied stopper for the cable does not completely seal the shell shape, I moved the hole upwards. The cover now has a hole for the cable.

Instructions:

1. Feed the cable through the hole in the shell

2. Place the nebulizer in the holder and pull the cable tight.  Insert the rubber plug into the hole

.

3. Position the tower so that the cable protrudes at the appropriate point. (Bend the cable downwards so that it does not lift the tower).

4.Fill the bowl with water and, if desired, some essential oil

5. Insert the cover

6. Plug it in and the nebulizer will start. you don't have to worry about the water. If there is not enough water, the nebulizer stops automatically

Print:

It is necessary to print the tray and the tower with supports. make sure that the tower is placed on the print bed with the closed side down

Used Parts:

Nebulizer