Infinity Cube - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Firebolt46

Toys & Games>Other Toys & Games

IP Report

Print Profile(2)

All

X1 Carbon

H2D

H2C

P2S

H2D Pro

X1E

H2S

P1S

X2D

A1 mini

P1P

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.1 h

1 plate

4.8(48)

3 color cube

1.4 h

1 plate

4.3(3)

Open in Bambu Studio

Boost

159

1.3 k

829

Released

Description

Sell Sell Sell

Better interlockers between the cubes

Comment & Rating (60)

@HHLL

I printed 2 on the sane plate when I removed them 1 broke immediately and the second one broke habit but I was able to fix also one of the hinges won't budge not so good

The designer has replied

@Firebolt46

I’m sorry to see this to fix your issue with the hinges, on some filaments, they may be a bit stiff at first but after a few minutes of fidgeting it might loosen up. And about the one that broke, yes it very much could be the STL/3MF that I uploaded and you downloaded might be bad but it could be the filament has moisture, or low quality, or there was a issue with your build plate. This very might be my fault at my end but have a look into something me of the thing I have mentioned. Thank you for taking the time to write this and upload the pictures of your issue. Thanks again

@duhfekzz

Print Profile

0.2mm layer, 2 walls, 15% infill

pretty good, one of the hinges is kind of weird

@duhfekzz

printed it again in white, it works perfectly now

@user_152751829

Print Profile

0.2mm layer, 2 walls, 15% infill

These came out great! I will have some awesome Christmas gifts for the family!

@Arne_H

Print Profile

0.2mm layer, 2 walls, 15% infill

cool

(Edited)

@Tazobactam

Print Profile

0.2mm layer, 2 walls, 15% infill

Relaxing

Show original

@Ekratky

Print Profile

0.2mm layer, 2 walls, 15% infill

@readysetprint

Print Profile

3 color cube

This model is really cool and no I am not talking about the infinity cube part I am talking about the multi color part. This is really useful when you need to print a three colored infinity cube!

The profile uploader has replied

@DSprinting

I’m glad you liked it!😁

(Edited)

@user_1589016059

Print Profile

0.2mm layer, 2 walls, 15% infill

One of the joints is a little stiff

The profile uploader has replied

@Firebolt46

Thanks for letting me know, when I print mine sometimes they are a little at bit stiff. However after a few minutes of fidgeting all joints seem to just get loose. Thanks for your comment!