Hueforge - Straight Outta Compton N.W.A Cover
Print Profile(1)
Description
Boost Me (for free)
If you appreciate my work, your support would be greatly appreciated
Donate via coffee…
Ko-Fi… https://ko-fi.com/lagnor69
PayPal… https://www.paypal.com/donate/?hosted_button_id=7XBNU8XD2XFAE
---------------------------------------------------------------------------------------------------------
Here you will find the corresponding frames
200 × 140 mm & 140 mm × 200 mm || All-in-One frame
https://makerworld.com/de/models/897636#profileId-856000
200 x 200 mm || All-in-One frame
https://makerworld.com/de/models/766355#profileId-701658
---------------------------------------------------------------------------------------------------------
Print at 100% infill with a layer height of 0.08mm and a 0.16mm base layer
The model measures 200x200mm
Higher layer heights below the minimum depth of 0.48mm are permissible
The maximum depth is 2.2mm, and the actual depth is 2.3mm
Filaments Used:
Sunlu PLA Black Transmission Distance: 0.3
BambuLab PLA Basic Blue Gray Transmission Distance: 3
Sunlu PLA Grey Transmission Distance: 1
Sunlu PLA White Transmission Distance: 5
This print utilizes four distinct filaments
Swap Instructions:
Begin with Black
At layer #7 (0.64mm) switch to Blue Gray
At layer #14 (1.2mm) switch to Grey
At layer #19 (1.6mm) switch to White for the remainder
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)