hat insert for baseball/bump cap/ shapping - Free 3D Print Model

Search models, users, collections, and posts

Mario Testa

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

H2D Pro

H2S

P2S

H2C

X1 Carbon

X1E

H2D

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

4.6 h

1 plate

3.4(8)

Open in Bambu Studio

Boost

233

602

498

127

Released

Description

hat insert for baseball/bump cap/ shapping

should be printed in ABS or any strengh filament

55cm circunference (small) must be scalated if you need medium or large

Comment & Rating (14)

@AceHua

Print Profile

0.2mm layer, 2 walls, 15% infill

super waste time and filament done 2 print one with brim and still fail

The profile uploader has replied

@Mario.Testa

I'm so sorry, of you need the same model o can create a thicker one and using 3D glue I'm pretty sure you will have a successful print. or you can try my upgraded model https://makerworld.com/models/2033921?appSharePlatform=copy

@user_1374462689

Print Profile

0.2mm layer, 2 walls, 15% infill

the print is a bit challenging for A1 mini. 1. print size is just within the print bed and there was issue with adhesion. My first two prints were failed in first two layers. 2. add brim 3. increase bed temperature to 65 - 70 for better adhesion. but quality is still not optimal and breaks easily unfortunately

@DrRocken

Print Profile

0.2mm layer, 2 walls, 15% infill

I'm working on making one for every hat. It keeps the hat shape while in storage. I have to many hats and only one head.

@PeiPower

terrible print, if you want some spaghetti then try to print this and it will fail ! waste of time and money save yourself .

@smorin

Why doesn't the model look like the cover picture?

@user_2395341294

Print Profile

0.2mm layer, 2 walls, 15% infill

failed twice. poor structure

@DrRocken

I have tipped this print to try and make it print better. Still no luck. I love these and would like to make this print work so I do not have to buy them.

@zaphodnothingth

prints were successful without any support?

@J_Gil

Print Profile

0.2mm layer, 2 walls, 15% infill

Bed Adhesion Issue:didnt stick to the bed at all

Strength Issue:when i got it to stick to the bed it fell apart at the top

The profile uploader has replied

@Mario.Testa

I'm sorry to hear that, maybe you can try with glue bed, or i can make a thicker version for you or try my upgraded version https://makerworld.com/models/2033921

@Abrila

Print Profile

0.2mm layer, 2 walls, 15% infill

@cdadamo

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.