Vortex Chess Pawn impossible pass through - Free 3D Print Model

Search models, users, collections, and posts

Charlie

Toys & Games>Other Toys & Games

IP Report

Print Profile(1)

All

0.2mm layer, 2 walls, 15% infill

Designer

2.8 h

1 plate

4.6(14)

Open in Bambu Studio

Boost

203

336

180

Released

Description

Chess pawn Vortex fidget

As a fan of chess, I had to create that vortex pawn

It's similar to the cone pass through vortex by in a pawn shape

The base is 3,8cm of diameter. The height is 7,6 cm

Weight is 44g

No support needed

A smaller size is available here (don't scale this version, you may have problems)

https://makerworld.com/fr/models/1044633#profileId-1030201

Boost Me (for free)

If you like my creation, giving a boost is the best way to support.
A like and a rate after the printing is also appreciated.

Comment & Rating (26)

@user_663256049

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect print… so much fun… thank you!

The profile uploader has replied

@3DCharlie

Thanks for the boost. I see it will be double fun for you :)

@kakabrito76

Print Profile

0.2mm layer, 2 walls, 15% infill

Other Issues:Unfortunately, this is the third time I've tried to print, and this part always gives an error. The other part printed perfectly, but this one is hopeless.

The profile uploader has replied

Show original

@3DCharlie

did you try with another filament? That s really ugly even at the bottom. Sometimes we can have problems at the top because it s less stable.

@kakabrito76

Replying to @3DCharlie :

I've tried with 2 other filaments, they didn't turn out bad on the bottom, but they don't finish, they always print in the air...

Show original

@user_1372120865

Print Profile

0.2mm layer, 2 walls, 15% infill

Broke shortly after print

The profile uploader has replied

@3DCharlie

do you have a picture to sée where it broke?

@user_1372120865

It was one of the first things we made. I’m wondering if we should have let it cool longer? It’s still fun to play with even though the one piece broke in half.

@user_784379855

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

My favorite fidget! I've made 10 because everyone loves them.

The profile uploader has replied

@3DCharlie

I'm glad it's so much appreciated

@Kwotsa

Do you think there will be issues if I scale this model up to be 20cm tall?

The designer has replied

@3DCharlie

It should work but it will a looser between the two part as the tolerances will be also bigger

@user_3773611187

Hello! Is this fidget passing through?

The designer has replied

@3DCharlie

Hello. yes it is

@rob5379

Print Profile

0.2mm layer, 2 walls, 15% infill

Easy Print!

@chocolate_1

Print Profile

0.2mm layer, 2 walls, 15% infill

very fun fidget in the shape of a pawn SO COOL!

@user_784379855

Boosted

Perfect fidget pass through. Thanks

@Atanas_Todorov

For me on the P2S the Part that has hollow top starts to wobble while the nozzle is printing on it in the upper layers which causes it to not print very even. I own Bambu Printer since 2 days , so any suggestions would be good. The 3d Print still works and fidgets , but does not look as great.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.