Photo Studio Box / with extra high back wall - Free 3D Print Model

Search models, users, collections, and posts

Kapusa

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

200mm X 200mm X 220mm

Designer

6.9 h

1 plate

4.9(50)

smaller for A1mini

Designer

5.6 h

1 plate

5.0(11)

0.2mm layer, 2 walls, 10% infill Max P1S size 240x248x250

8.7 h

1 plate

5.0(2)

Connector for two photo backdrops

35 min

1 plate

5.0(1)

Open in Bambu Studio

Boost

749

2121

1.3 k

562

Released

Description

This way you can easily take high-quality photos.

I made the back wall a bit higher than others so I could photograph things that were a bit bigger.
If you print it in matte black like I did,

you can simply lower the exposure when taking the photo with your phone.

And that's how you get pictures like this.

Of course, you could also simply print it in the color of your choice, such as white.

If you print in a dark color, a matte filament is better, as there are not as many reflections in the background.

In the pictures I use the turntable which I can also recommend:

https://makerworld.com/en/models/476115#profileId-387012

Comment & Rating (80)

@gadgethsu

printed quite nicely except for the top on one side, likely user error though I didn’t touch it

The designer has replied

@Kapusa

Did you perhaps speed up the printing?

@DreamForge_3D

Replying to @Kapusa :

I had the same issue even after seen these comments and decreasing the speed to 100mms. This is in the highest part of the little studio and I am convinced that this is due to the vibration of the printer itselsef. I wols reccomend everyone to print this with 50mms (Ender 3 speed - LoL) but avoiding to transmit vibrations to the printing piece.

@RalfDiedrichsen

Boosted

I scaled it up to fill the full P1S-bed in lenght and width. Got an error at more than 239mm each. Don't know why. So I used this size. Wanted it a bit larger but it is ok. The print itself is good. The walls are a bit rough but this is not bad for the purpose. I used Extrudr PLA NX1

@acemodder

Print Profile

200mm X 200mm X 220mm

printed great, even upscaled it a bit to max the size

The profile uploader has replied

@Kapusa

thank you for your idea

@nico9889

It’s relatively cheap, prints fast enough, and gives a huge boost to the photos I've taken. Unfortunately the "thin" walls vibrate a lot as they get higher, but it's not really an issue for me (printed with the P1S default 0.2 profile, external wall 100mm/s, internal wall 200mm/s). I would rate it 5/5 if I could, but I'm not using the Bambu' services.

@foggydusk

Print Profile

200mm X 200mm X 220mm

perfect

@user_2000728238

Print Profile

200mm X 200mm X 220mm

useful

@philsfidgets

Boosted

Print Profile

200mm X 200mm X 220mm

works well enough, I had some issues with warping but it was most likely was down to filament. looks better after a few coats ofatt black primer

@Banks619

Boosted

Print Profile

200mm X 200mm X 220mm

works well just need to paint it white.

@kaijucreqtions

love it

@K4rmaCreations

Boosted

Print Profile

200mm X 200mm X 220mm

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.