Pull String Spinning Top

Search models, users, collections, and posts

Nalrod

Toys & Games>Other Toys & Games

IP Report

GIF

Print Profile(2)

All

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

2.1 h

2 plates

5.0(3)

0.2mm layer, 2 walls, 15% infill

Designer

2 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Bill of Materials

Bambu Filaments

Select all

List other parts

String x 1: 600mm

Description

Inspired by the traditional wooden spinning tops, this design not only pays homage to the rich heritage of Jura craftsmanship but also showcases the potential of modern manufacturing techniques in creating functional and aesthetically pleasing toys. Whether you're a collector or looking for a fun, educational toy, this 3D printed spinning top promises hours of spinning enjoyment and a touch of history in every twirl.

Dimensions in mm are Ø55x100

Plate 1 contains 1 axle, 1 ring, 1 hat, 2 half body parts.

To assemble:

Screw the nut (hat) on the shorter thread of the axle
Slide the ring on the axe
Screw the body on the longer thread. The lower part will act as a locking nut, so glue is not necessary.
You will need one arm length (600mm) of string. Slide it into the hole and put a knot at each end big enough to not slide out.

How to Launch:

Hold the ring between your thumb and index
Wind the string by rotating the body by hand.
Pull the string once and let it rewind by itself while still holding the string.
Now pull the string with a quick, firm motion, release the string and let go of the ring, allowing the top to spin freely on the surface.

The top can be spun upside down on the hat.

My others spinning top models

Filaments I used for this print are:

Matte mandarin orange (11300)
Matte Ice Blue (11601)
Matte Latte Brown (11800)
Matte Bright Green (10503)

Boost Me (for free)

Did you like it? Rate my model and send me a boost. Trouble with the print, Leave a comment. Boost and feedback are greatly appreciated

Notes

Notes
Includes bambu studio 3mf file.
All photos uploaded are of the actual printed model, and are copyright protected
If you enjoy this model please consider to buy me a coffee
If you prefer you can send me sats instead.

Comment & Rating (6)

@user_98806232

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@Nalrod

Thanks for the boost!

@JiwhA0080

Print Profile

0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@Nalrod

Thanks for the rating!

@RTRIB01

Print Profile

0.2mm layer, 2 walls, 15% infill

@RTRIB01

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.