Fleur-de-lis with Rose HueForge
Print Profile(1)
Description
Project: fleur-de-lis.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 193.72x200mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA+ Sunlu Red Transmission Distance: 6
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA+ Sunlu Lemon Yellow Transmission Distance: 5
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ Sunlu White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #14 (1.2mm) swap to BambuLab Green
At layer #16 (1.36mm) swap to Lemon Yellow
At layer #18 (1.52mm) swap to Blue
At layer #23 (1.92mm) swap to White for the rest.
Boost Me (for free)
Please consider buying me a coffee and boosting me! Thank you so much!
PC: Stiglich
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)