P1s / X1c Double-Layer Riser For AMS & AMS2 pro

Thanks for your support, you can check out my other models on my homepage

Xiaomi Temperature and Humidity Monitor 2 Magnetic Mounting Base from Tcubecn - MakerWorld

PTFE Tube Anti-Loss Plug from Tcubecn - MakerWorld

AMS Feeder Port Protective Casing (4mm Outer Diameter PTFE Tube) Remix from Tcubecn - MakerWorld

5.8L Rice Container Dry Box Bearing-Free Hinge from Tcubecn - MakerWorld

AMS Secondary Riser AMS Secondary Riser_bilibili_bilibili

Updates:

2026.01.10 Major Update

V5 Version (adds one layer, supports AMS 2 pro, tray changed to separate print)

New print profiles:

1. Added V5 AMS2 pro version

   

2. Added V5 AMS1 version

    

   

3. Added V5 Sliding Air Damper one-layer riser (compatible with V4)

   

4. Added V4 separate print version tray, reducing support removal difficulty

    

   

    

2025.09.07     

https://www.bilibili.com/video/BV1LMHCzpEea/

All print profiles have been updated

!!!Friends who printed the previous version, please print this storage box profile, you need to print and replace the two front frames - add extension ports

Added storage boxes on both sides, modular design, can be individually pulled out for easy cleaning

For friends who have printed the previous version, you need to print and replace the two front frames (add extension ports)

2025.02.09 

Added version with shifted center of gravity forward, for more stable placement, please check print profiles 3 and 4

Introduction:

A while ago I made a beautiful and practical riser, but the AMS occupied viewing space and made the glass top cover inconvenient to remove. So, referring to other riser models, I designed this secondary riser to further lift the AMS

Main features:

1. Can further lift the AMS based on the P1S/X1C riser, facilitating removal of the top glass for inspection and maintenance
2. Moves the AMS as far back as possible, increasing the top glass viewing area
3. The glass top cover can be slid
4. Has an angled glass top cover bracket
5. Supports 4-plate build plate holder
6. Reserved a large number of expansion slots, convenient for future expansion of functions
7. Dimensions compatible with most existing risers

Print profiles:

4-plate version: fewer divisions

2-plate version: easier to print

Installation:

Build plate holder supports are relatively difficult to remove, you can start from these areas and pull them out directly